2008 Water Quality Assessment - 305(b) Report

Metadata:


Identification_Information:
Citation:
Citation_Information:
Originator: Washington State Department of Ecology
Publication_Date: 20090223
Title: 2008 Water Quality Assessment - 305(b) Report
Geospatial_Data_Presentation_Form: vector digital data
Series_Information:
Series_Name: 2008 Water Quality Assessment - 305(b) Report
Issue_Identification: 2008
Publication_Information:
Publication_Place: Olympia, Washington
Publisher: Washington State Department of Ecology
Online_Linkage:  http://www.ecy.wa.gov/services/gis/data/data.htm#w
Description:
Abstract:
Washington State's 2008 Water Quality Assessment (WQA) is produced in the Environmental Protection Agency's "Integrated Report" format. The WQA consists of both the 303(d) List and the 305(b) Report. The 303(d) List is comprised of only Category 5 listings. The 305(b) Report lists all waters and all categories. The 2008 WQA is presented on the 1:24k LLID (Longitude/Latitude ID) hydro layer.
Purpose:
Creation of the 303(d) List and 305(b) Report satisifies the state's requirement under the Clean Water Act to report impaired water to the EPA.
Supplemental_Information:
The 2008 WQA rates sampled waters into one of five categories:
Category 1: Meets tested standards. Placement in this category means that the waterbody segment meets the criteria it was tested for. It does not necessarily mean that a water body is free of all pollutants. Most water quality monitoring is designed to detect a specific array of pollutants, so placement in this category means that the water body met standards for all the pollutants for which it was tested. Specific information about the monitoring results may be found in the individual listings.
Category 2: Waters of concern. This category lists waterbody segments where there is some evidence of a water quality problem, but not enough to require production of a TMDL. There are several reasons why a water body would be placed in this category. A water body might have pollution levels that are not quite high enough to violate the water quality standards, or there may not have been enough violations to categorize it as impaired according to Ecology's listing policy. There might be data showing water quality violations, but the data were not collected using proper scientific methods. In all of these situations, these are waters that we will want to continue to test.
Category 3: Insufficient or No data. This category houses those listings where the assessed data was insufficient to determine a proper categorization of the water. Water bodies that have not been tested will not be individually listed, but if they do not appear in one of the other categories, they are assumed to belong in Category 3.
Category 4: Polluted waters that do not require a TMDL. This category is for waterbody segments that have pollution problems that are being solved in one of three ways.
Category 4a is for waterbody segments that have an approved TMDL in place and are actively being implemented.
Category 4b is for waterbody segments that have a pollution control plan in place that is expected to solve the pollution problems. While pollution control plans are not TMDLs, they must have many of the same features and there must be some legal or financial guarantee that they will be implemented.
Category 4c is for waterbody segments impaired by causes that cannot be addressed through a TMDL (not due to a pollutant). These impairments include low water flow, stream channelization, and dams. These problems require complex solutions to help restore streams to more natural conditions.
Category 5: Polluted waters that require a TMDL. Category 5 represents the 303(d) list, the traditional list of impaired water bodies. Placement in this category means that Ecology has data showing that the water quality standards have been violated for one or more pollutants, and there is no TMDL or pollution control plan. TMDLs are required for the water bodies in this category.
The last polluted waters list was done in 2004.
Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 20090129
Currentness_Reference: from publication date until superceded
Status:
Progress: Complete
Maintenance_and_Update_Frequency: Approximately every two years.
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -124.772840
East_Bounding_Coordinate: -116.758088
North_Bounding_Coordinate: 49.041258
South_Bounding_Coordinate: 45.482964
Keywords:
Theme:
Theme_Keyword_Thesaurus: None
Theme_Keyword: 305(b)
Theme_Keyword: WQA
Theme_Keyword: Water Quality Assessment
Theme_Keyword: Integrated Report
Place:
Place_Keyword_Thesaurus: None
Place_Keyword: Washington State
Place_Keyword: Pacific
Place_Keyword: northwest
Stratum:
Stratum_Keyword: water and sediment
Temporal:
Temporal_Keyword: 2008
Access_Constraints: None
Use_Constraints: <http://www.ecy.wa.gov/copyright.html>
Point_of_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Patrick Lizon
Contact_Organization: Washington State Department of Ecology
Contact_Position: Water Quality Assessment Coordinator
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 98504-7600
Country: United States of America
Contact_Voice_Telephone: 360-407-6782
Contact_Facsimile_Telephone: 360-407-6426
Contact_Electronic_Mail_Address: 303d@ecy.wa.gov
Hours_of_Service: 0800 - 1630, M-F, Pacific time zone
Contact_Instructions: Preferred contact is through email.
Browse_Graphic:
Browse_Graphic_File_Name: <http://www.ecy.wa.gov/services/gis/data/environment/303d08.jpg>
Browse_Graphic_File_Description: Simple image
Browse_Graphic_File_Type: JPEG
Data_Set_Credit: Washington State Department of Ecology
Security_Information:
Security_Classification: Unclassified
Native_Data_Set_Environment:
Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.1.1850

Data_Quality_Information:
Positional_Accuracy:
Horizontal_Positional_Accuracy:
Quantitative_Horizontal_Positional_Accuracy_Assessment:
Horizontal_Positional_Accuracy_Value: 1:24,000
Lineage:
Source_Information:
Source_Citation:
Citation_Information:
Originator: Pacific Northwest Hydro Framework Consortium
Publication_Date: 2008
Title: Pacific Northwest Hydro Framework
Geospatial_Data_Presentation_Form: map
Online_Linkage: <http://hydro.reo.gov>
Source_Scale_Denominator: 24,000
Type_of_Source_Media: map
Source_Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 2008
Source_Currentness_Reference: ground condition
Source_Contribution:
The base hydro layer is the 1:24k LLID from the Pacific Northwest Hydro Framework consortium.
Process_Step:
Process_Description:
1) Join Watershed Assessment Tracking System (WATS) tabular listing data to 24K Hydrography polygon layers on LLID number -water body, water grid and water quarter grid (sediments only). 2) Extract joined polygons (those with associated listings) to a separate polygon feature class. 3) Join WATS tabular listing data to 24K Hydrography water courses on LLID number and use lower and upper segment route address values to create linear events depicting the listed segments. 4) Extract the events of the listed segments to a line feature class. 5) Buffer the line feature class by 50 feet with the Full and Flat options to create a polygon layer of listed stream segments. 6) Merge the listed stream segment polygons with the listed polygons created in step 2 to create a single polygon layer of listed water bodies. 7) Use a Python script to create duplicate geometries for polygons with multiple listings so that there is a one-to-one relationship between polygon features and rows in the listing database. 8) Export the polygons to a shapefile for publication as a download on the agency website.
Source_Used_Citation_Abbreviation:
\\ecyfllcyadp01\export\ADSGIS\Projects\WQ_TCP_Assessment_2008\WQ_TCP_Assessment.gdb
Process_Date: 20080813
Process_Time: 09264000
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Dan Saul
Contact_Organization: Washington State Department of Ecology
Contact_Position: GIS Manager
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 98504-7600
Country: United States of America
Contact_Voice_Telephone: 360-407-6419
Contact_Facsimile_Telephone: 360-407-6493
Contact_Electronic_Mail_Address: dan.saul@ecy.wa.gov
Hours_of_Service: 0800 - 1700, M-F, Pacific time zone

Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Vector
Point_and_Vector_Object_Information:
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: G-polygon
Point_and_Vector_Object_Count: 18362

Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Map_Projection:
Map_Projection_Name: Lambert Conformal Conic
Lambert_Conformal_Conic:
Standard_Parallel: 45.833333
Standard_Parallel: 47.333333
Longitude_of_Central_Meridian: -120.500000
Latitude_of_Projection_Origin: 45.333333
False_Easting: 1640416.666667
False_Northing: 0.000000
Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:
Abscissa_Resolution: 0.000000
Ordinate_Resolution: 0.000000
Planar_Distance_Units: survey feet
Geodetic_Model:
Horizontal_Datum_Name: D_North_American_1983_HARN
Ellipsoid_Name: Geodetic Reference System 80
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257222

Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: 305b_list
Entity_Type_Definition: The complete 2008 Water Quality Assessment for Washington State
Entity_Type_Definition_Source: Ecology
Attribute:
Attribute_Label: FID
Attribute_Definition: Internal feature number.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain:
Sequential unique whole numbers that are automatically generated.
Attribute:
Attribute_Label: Shape
Attribute_Definition: Feature geometry.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Coordinates defining the features.
Attribute:
Attribute_Label: LLID_NR
Attribute_Definition:
13 digit LLID identifier - concatenated longitude and latitude of mouth of stream in decimal degrees.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: WTRCRS24K_
Attribute_Definition:
Lower Route Measure - Distance from mouth of stream in kilometers. Defines route measure where a stream exits a specific section, based on township, ranges, and sections.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: WTRCRS24K1
Attribute_Definition:
Upper Route Measure - Distance from mouth of stream in kilometers. Defines route measure where a stream enters a specific section, based on township, ranges, and sections.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: GRD_CELL_N
Attribute_Definition:
Grid Cell Identification number. Used for marine waters and large lakes (over 1500 acres).
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: WTRBD_DS
Attribute_Definition: Waterbody Name - Names collected during the WQA, not GNIS
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: CAT_DS
Attribute_Definition: Category Description - Water/Sediment Category rating
Attribute_Definition_Source: Ecology
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: 1
Enumerated_Domain_Value_Definition:
Category 1: Meets tested standards. Placement in this category means that the waterbody segment meets the criteria it was tested for. It does not necessarily mean that a water body is free of all pollutants. Most water quality monitoring is designed to detect a specific array of pollutants, so placement in this category means that the water body met standards for all the pollutants for which it was tested. Specific information about the monitoring results may be found in the individual listings.
Enumerated_Domain_Value_Definition_Source: Ecology
Enumerated_Domain:
Enumerated_Domain_Value: 2
Enumerated_Domain_Value_Definition:
Category 2: Waters of concern. This category lists waterbody segments where there is some evidence of a water quality problem, but not enough to require production of a TMDL. There are several reasons why a water body would be placed in this category. A water body might have pollution levels that are not quite high enough to violate the water quality standards, or there may not have been enough violations to categorize it as impaired according to Ecology's listing policy. There might be data showing water quality violations, but the data were not collected using proper scientific methods. In all of these situations, these are waters that we will want to continue to test.
Enumerated_Domain_Value_Definition_Source: Ecology
Enumerated_Domain:
Enumerated_Domain_Value: 3
Enumerated_Domain_Value_Definition:
Category 3: Insufficient or No data. This category houses those listings where the assessed data was insufficient to determine a proper categorization of the water. Water bodies that have not been tested will not be individually listed, but if they do not appear in one of the other categories, they are assumed to belong in Category 3.
Enumerated_Domain_Value_Definition_Source: Ecology
Enumerated_Domain:
Enumerated_Domain_Value: 4
Enumerated_Domain_Value_Definition:
Category 4: Polluted waters that do not require a TMDL. This category is for waterbody segments that have pollution problems that are being solved in one of three ways.
Enumerated_Domain_Value_Definition_Source: Ecology
Enumerated_Domain:
Enumerated_Domain_Value: 4a
Enumerated_Domain_Value_Definition:
Category 4a is for waterbody segments that have an approved TMDL in place and are actively being implemented.
Enumerated_Domain_Value_Definition_Source: Ecology
Enumerated_Domain:
Enumerated_Domain_Value: 4b
Enumerated_Domain_Value_Definition:
Category 4b is for waterbody segments that have a pollution control plan in place that is expected to solve the pollution problems. While pollution control plans are not TMDLs, they must have many of the same features and there must be some legal or financial guarantee that they will be implemented.
Enumerated_Domain_Value_Definition_Source: Ecology
Enumerated_Domain:
Enumerated_Domain_Value: 4c
Enumerated_Domain_Value_Definition:
Category 4c is for waterbody segments impaired by causes that cannot be addressed through a TMDL (not due to a pollutant). These impairments include low water flow, stream channelization, and dams. These problems require complex solutions to help restore streams to more natural conditions.
Enumerated_Domain_Value_Definition_Source: Ecology
Enumerated_Domain:
Enumerated_Domain_Value: 5
Enumerated_Domain_Value_Definition:
Category 5: Polluted waters that require a TMDL. Category 5 represents the 303(d) list, the traditional list of impaired water bodies. Placement in this category means that Ecology has data showing that the water quality standards have been violated for one or more pollutants, and there is no TMDL or pollution control plan. TMDLs are required for the water bodies in this category.
Enumerated_Domain_Value_Definition_Source: Ecology
Attribute:
Attribute_Label: PARM_DS
Attribute_Definition: Parameter - The pollutant being measured
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: MED_DS
Attribute_Definition:
Medium - The medium which was measured in terms of water, tissue, sediment, etc.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: LISTING_ID
Attribute_Definition:
UNIQUE - This is Ecology's primary reference to any listing in the WQA. This number allows tracking through the various iterations of the WQA.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: ECOLOGY_ID
Attribute_Definition:
This ID code was used in the 2004 version of the shapefile to identify listings. Please use LISTING_ID as a unique identifier.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: Shape_Leng
Attribute:
Attribute_Label: Shape_Area
Attribute_Definition: Area of feature in internal units squared.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Positive real numbers that are automatically generated.

Distribution_Information:
Distributor:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Washington State Department of Ecology
Contact_Person: Rich Kim
Contact_Position: Spatial Database Administrator
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 98504-7600
Country: United States of America
Contact_Voice_Telephone: 360-407-6121
Contact_Facsimile_Telephone: 360-407-6493
Contact_Electronic_Mail_Address: rich.kim@ecy.wa.gov
Hours_of_Service: 0800 - 1700, M-F, Pacific time zone
Resource_Description: ArcGIS data layer
Distribution_Liability:
The Washington State Department of Ecology provides these geographic data "AS IS" WITHOUT A WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE, AND/OR NON-INFRINGEMENT.
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Format_Name: SHP
Format_Specification: Shapefile
File_Decompression_Technique: Zip
Transfer_Size: 38.229
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name: <ftp://www.ecy.wa.gov/gis_a/environment/303d08.zip>
Fees: $75/hour, one hour mininum
Ordering_Instructions:
Digital data order form is available at <http://www.ecy.wa.gov/services/gis/data/digital.doc>.
Turnaround: One week

Metadata_Reference_Information:
Metadata_Date: 20090224
Metadata_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Washington State Department of Ecology
Contact_Person: Patrick Lizon
Contact_Position: Water Quality Assessment Coordinator
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 98504-7600
Country: United States of America
Contact_Voice_Telephone: 360-407-6782
Contact_Facsimile_Telephone: 360-407-6426
Contact_Electronic_Mail_Address: 303d@ecy.wa.gov
Hours_of_Service: 0800 - 1630, M-F, Pacific time zone
Contact_Instructions: Preferred contact is through email.
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time
Metadata_Access_Constraints: None
Metadata_Use_Constraints: None

Generated by mp version 2.9.6 on Tue Feb 24 13:54:34 2009

2008 Water Quality Assessment - 303(d) List

Metadata:


Identification_Information:
Citation:
Citation_Information:
Originator: Washington State Department of Ecology
Publication_Date: 20090223
Title: 2008 Water Quality Assessment - 303(d) List
Edition: 1
Geospatial_Data_Presentation_Form: vector digital data
Series_Information:
Series_Name: Water Quality Assessment - 303(d) List
Issue_Identification: 2008
Publication_Information:
Publication_Place: Olympia, Washington, USA
Publisher: Washington State Department of Ecology
Online_Linkage: http://www.ecy.wa.gov/services/gis/data/data.htm#w
Description:
Abstract:
Washington State's 2008 Water Quality Assessment (WQA) is produced in the Environmental Protection Agency's "Integrated Report" format. The WQA consists of both the 303(d) List and the 305(b) Report. The 303(d) List is comprised of only Category 5 listings. The 305(b) Report lists all waters and all categories. The 2008 WQA is presented on the 1:24k LLID (Longitude/Latitude ID) hydro layer.
Purpose:
Creation of the 303(d) List and 305(b) Report satisifies the state's requirement under the Clean Water Act to report impaired water to the EPA.
Supplemental_Information:
The 2008 WQA rates sampled waters into one of five categories. This shapefile represents the 303(d) List or CATEGORY 5 ONLY.
Category 1: Meets tested standards. Placement in this category means that the waterbody segment meets the criteria it was tested for. It does not necessarily mean that a water body is free of all pollutants. Most water quality monitoring is designed to detect a specific array of pollutants, so placement in this category means that the water body met standards for all the pollutants for which it was tested. Specific information about the monitoring results may be found in the individual listings.
Category 2: Waters of concern. This category lists waterbody segments where there is some evidence of a water quality problem, but not enough to require production of a TMDL. There are several reasons why a water body would be placed in this category. A water body might have pollution levels that are not quite high enough to violate the water quality standards, or there may not have been enough violations to categorize it as impaired according to Ecology's listing policy. There might be data showing water quality violations, but the data were not collected using proper scientific methods. In all of these situations, these are waters that we will want to continue to test.
Category 3: Insufficient or No data. This category houses those listings where the assessed data was insufficient to determine a proper categorization of the water. Water bodies that have not been tested will not be individually listed, but if they do not appear in one of the other categories, they are assumed to belong in Category 3.
Category 4: Polluted waters that do not require a TMDL. This category is for waterbody segments that have pollution problems that are being solved in one of three ways.
Category 4a is for waterbody segments that have an approved TMDL in place and are actively being implemented.
Category 4b is for waterbody segments that have a pollution control plan in place that is expected to solve the pollution problems. While pollution control plans are not TMDLs, they must have many of the same features and there must be some legal or financial guarantee that they will be implemented.
Category 4c is for waterbody segments impaired by causes that cannot be addressed through a TMDL (not due to a pollutant). These impairments include low water flow, stream channelization, and dams. These problems require complex solutions to help restore streams to more natural conditions.
Category 5: Polluted waters that require a TMDL. Category 5 represents the 303(d) list, the traditional list of impaired water bodies. Placement in this category means that Ecology has data showing that the water quality standards have been violated for one or more pollutants, and there is no TMDL or pollution control plan. TMDLs are required for the water bodies in this category.
The last polluted waters list was done in 2004.
Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 20090129
Currentness_Reference: from publication date until superceded
Status:
Progress: Complete
Maintenance_and_Update_Frequency: Approximately every two yeras
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -124.772840
East_Bounding_Coordinate: -116.758088
North_Bounding_Coordinate: 49.041258
South_Bounding_Coordinate: 45.492948
Keywords:
Theme:
Theme_Keyword_Thesaurus: None
Theme_Keyword: 303(d)
Theme_Keyword: WQA
Theme_Keyword: Water Quality Assessment
Theme_Keyword: Integrated Report
Place:
Place_Keyword_Thesaurus: None
Place_Keyword: Washington State
Place_Keyword: Pacific
Place_Keyword: northwest
Stratum:
Stratum_Keyword: water and sediment
Temporal:
Temporal_Keyword: 2008
Access_Constraints: None
Use_Constraints: <http://www.ecy.wa.gov/copyright.html>
Point_of_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Patrick Lizon
Contact_Organization: Washington State Department of Ecology
Contact_Position: Water Quality Assessment Coordinator
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 98504-7600
Country: United States of America
Contact_Voice_Telephone: 360-407-6782
Contact_Facsimile_Telephone: 360-407-6426
Contact_Electronic_Mail_Address: 303d@ecy.wa.gov
Hours_of_Service: 0800 - 1630, M-F, Pacific time zone
Contact_Instructions: Preferred contact is through email.
Browse_Graphic:
Browse_Graphic_File_Name: <http://www.ecy.wa.gov/services/gis/data/environment/303d08.jpg>
Browse_Graphic_File_Description: Simple image
Browse_Graphic_File_Type: JPG
Data_Set_Credit: Washington State Department of Ecology
Security_Information:
Security_Classification: Unclassified
Native_Data_Set_Environment:
Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.3.1.1850
Cross_Reference:
Citation_Information:

Data_Quality_Information:
Positional_Accuracy:
Horizontal_Positional_Accuracy:
Quantitative_Horizontal_Positional_Accuracy_Assessment:
Horizontal_Positional_Accuracy_Value: 24,000
Lineage:
Source_Information:
Source_Citation:
Citation_Information:
Originator: Pacific Northwest Hydro Framework Consortium.
Publication_Date: 2008
Title: Pacific Northwest Hydro Framework
Geospatial_Data_Presentation_Form: map
Online_Linkage: <http://hydro.reo.gov>
Source_Scale_Denominator: 24,000
Type_of_Source_Media: map
Source_Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 2008
Source_Currentness_Reference: ground condition
Source_Contribution:
The base hydro layer is the 1:24k LLID from the Pacific Northwest Hydro Framework consortium.
Process_Step:
Process_Description:
1) Join Watershed Assessment Tracking System (WATS) tabular listing data to 24K Hydrography polygon layers on LLID number -water body, water grid and water quarter grid (sediments only). 2) Extract joined polygons (those with associated listings) to a separate polygon feature class. 3) Join WATS tabular listing data to 24K Hydrography water courses on LLID number and use lower and upper segment route address values to create linear events depicting the listed segments. 4) Extract the events of the listed segments to a line feature class. 5) Buffer the line feature class by 50 feet with the Full and Flat options to create a polygon layer of listed stream segments. 6) Merge the listed stream segment polygons with the listed polygons created in step 2 to create a single polygon layer of listed water bodies. 7) Use a Python script to create duplicate geometries for polygons with multiple listings so that there is a one-to-one relationship between polygon features and rows in the listing database. 8) Export the polygons to a shapefile for publication as a download on the agency website.
Source_Used_Citation_Abbreviation:
\\ecyfllcyadp01\export\ADSGIS\Projects\WQ_TCP_Assessment_2008\WQ_TCP_Assessment.gdb
Process_Date: 20080813
Process_Time: 09264000
Process_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: Dan Saul
Contact_Organization: Washington State Department of Ecology
Contact_Position: GIS Manager
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 985047600
Country: United States of America
Contact_Voice_Telephone: 360-407-6419
Contact_Facsimile_Telephone: 360-407-6493
Contact_Electronic_Mail_Address: dan.saul@ecy.wa.gov
Hours_of_Service: 0800 - 1700, M-F, Pacific time zone

Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Vector
Point_and_Vector_Object_Information:
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: G-polygon
Point_and_Vector_Object_Count: 3672

Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Map_Projection:
Map_Projection_Name: Lambert Conformal Conic
Lambert_Conformal_Conic:
Standard_Parallel: 45.833333
Standard_Parallel: 47.333333
Longitude_of_Central_Meridian: -120.500000
Latitude_of_Projection_Origin: 45.333333
False_Easting: 1640416.666667
False_Northing: 0.000000
Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:
Abscissa_Resolution: 0.000000
Ordinate_Resolution: 0.000000
Planar_Distance_Units: survey feet
Geodetic_Model:
Horizontal_Datum_Name: D_North_American_1983_HARN
Ellipsoid_Name: Geodetic Reference System 80
Semi-major_Axis: 6378137.000000
Denominator_of_Flattening_Ratio: 298.257222

Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: 303d_list
Entity_Type_Definition:
Category 5 listings in the 2008 Water Quality Assessment for Washington State
Entity_Type_Definition_Source: Ecology
Attribute:
Attribute_Label: FID
Attribute_Definition: Internal feature number.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain:
Sequential unique whole numbers that are automatically generated.
Attribute:
Attribute_Label: Shape
Attribute_Definition: Feature geometry.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Coordinates defining the features.
Attribute:
Attribute_Label: LLID_NR
Attribute_Definition:
13 digit LLID identifier - concatenated longitude and latitude of mouth of stream in decimal degrees.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: WTRCRS24K_
Attribute_Definition:
Lower Route Measure - Distance from mouth of stream in kilometers. Defines route measure where a stream exits a specific section, based on township, ranges, and sections.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: WTRCRS24K1
Attribute_Definition:
Upper Route Measure - Distance from mouth of stream in kilometers. Defines route measure where a stream enters a specific section, based on township, ranges, and sections.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: GRD_CELL_N
Attribute_Definition:
Grid Cell Identification number. Used for marine waters and large lakes (over 1500 acres).
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: WTRBD_DS
Attribute_Definition: Waterbody Name - Names collected during the WQA, not GNIS
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: CAT_DS
Attribute_Definition: Category Description - Water/Sediment Category rating
Attribute_Definition_Source: Ecology
Attribute_Domain_Values:
Enumerated_Domain:
Enumerated_Domain_Value: 5
Enumerated_Domain_Value_Definition:
Catagory 5: Polluted waters that require a TMDL. Category 5 represents the 303(d) list, the traditional list of impaired water bodies. Placement in this category means that Ecology has data showing that the water quality standards have been violated for one or more pollutants, and there is no TMDL or pollution control plan. TMDLs are required for the water bodies in this category.
Enumerated_Domain_Value_Definition_Source: Ecology
Attribute:
Attribute_Label: PARM_DS
Attribute_Definition: Parameter - The pollutant being measured
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: MED_DS
Attribute_Definition:
Medium - The medium which was measured in terms of water, tissue, sediment, etc.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: LISTING_ID
Attribute_Definition:
UNIQUE - This is Ecology's primary reference to any listing in the WQA. This number allows tracking through the various iterations of the WQA.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: ECOLOGY_ID
Attribute_Definition:
This ID code was used in the 2004 version of the shapefile to identify listings. Please use LISTING_ID as a unique identifier.
Attribute_Definition_Source: Ecology
Attribute:
Attribute_Label: Shape_Leng
Attribute:
Attribute_Label: Shape_Area
Attribute_Definition: Area of feature in internal units squared.
Attribute_Definition_Source: ESRI
Attribute_Domain_Values:
Unrepresentable_Domain: Positive real numbers that are automatically generated.

Distribution_Information:
Distributor:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Washington State Department of Ecology
Contact_Person: Rich Kim
Contact_Position: Spatial Database Administrator
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 98504-7600
Country: United States of America
Contact_Voice_Telephone: 360-407-6121
Contact_Facsimile_Telephone: 360-407-6493
Contact_Electronic_Mail_Address: rich.kim@ecy.wa.gov
Hours_of_Service: 0800 - 1700, M-F, Pacific time zone
Resource_Description: ArcGIS data layer
Distribution_Liability:
The Washington State Department of Ecology provides these geographic data "AS IS" WITHOUT A WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR USE, AND/OR NON-INFRINGEMENT.
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Format_Name: SHP
Format_Specification: Shapefile
File_Decompression_Technique: Zip
Transfer_Size: 9.404
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name: <ftp://www.ecy.wa.gov/gis_a/environment/303d08.zip>
Fees: $75/hour, one hour minimum
Ordering_Instructions:
Order form is available at <http://www.ecy.wa.gov/services/gis/data/digital.doc>.
Turnaround: One week

Metadata_Reference_Information:
Metadata_Date: 20090224
Metadata_Contact:
Contact_Information:
Contact_Organization_Primary:
Contact_Organization: Washington State Department of Ecology
Contact_Person: Patrick Lizon
Contact_Position: Water Quality Assessment Coordinator
Contact_Address:
Address_Type: mailing address
Address: P.O. Box 47600
City: Olympia
State_or_Province: Washington
Postal_Code: 98504-7600
Country: United States of America
Contact_Voice_Telephone: 360-407-6782
Contact_Facsimile_Telephone: 360-407-6426
Contact_Electronic_Mail_Address: 303d@ecy.wa.gov
Hours_of_Service: 0800 - 1630, M-F, Pacific time zone
Contact_Instructions: Preferred contact is through email.
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Time_Convention: local time
Metadata_Access_Constraints: None
Metadata_Use_Constraints: None

Generated by mp version 2.9.6 on Tue Feb 24 13:54:22 2009